Fluid Coupling

Product Fluid Coupling

Home » Product » Fluid Coupling

Specifications of the H type fluid coupling

During motor activation the motor current can be absorbed more than 6 times and the motor can be driven at very low load.
The drive shaft and driven shaft can be protected from overload or pinching.
You can reduce the inconvenience of using expensive special winding motors and excessive initial equipment investment.

When the load fluctuation is severe (examples: crusher, stirrer, etc.)
When you require a quick start (examples: wheat, crane, etc.)
More problems will occur if you maneuver after applying the load (examples: conveyor, dehydration function)

To reduce this problem, the benefits of using a soft start fluid coupling are

If you are using an expensive special winding type motor, you can replace it with a normal motor.
It is possible to prevent motor speed decline or motor burn out even under instantaneous overload.
It is possible to brake the driven equipment by reversing the motor rotation.
Since there is no mechanical connection, it is possible to protect both the motor and the driven equipment during impact load.
It is possible to start even after absorbing about 75% of the starting current.